filter
-
Brand
- By Category
- Direction
- Date Range
423Events
Pictures
Events
Editorial An Arctic Summer: Boring Through the Pack in Melville Bay.
- 2020-03-20
- 1
Editorial At Sea-Signalling a Passing Steamer-Drawn by Winslow Homer (Every Saturday, Vol. II, New Series).
- 2020-03-02
- 1
Editorial Negative - SS Gippsland at the Mitchell River Wharf, Bairnsdale, Victoria, circa 1910, The SS Gippsland tied up at the Mitchell River Wharf, Bairnsdale. There is a butter factory in the background. The screw steamer 'Gippsland' was a timber-hulled pass...
- 2020-01-15
- 1
Editorial Lantern Slide - Paddle Steamer 'Hygeia,' Victoria, Date Unknown, Black and white image of the paddle steamer Hygeia operating on Port Phillip, Victoria, photographed by A.J. Campbell. In the late 1800s early 1900s paddle steamers were a luxury form of ...
- 2020-01-15
- 1
Editorial Model of the ferry steamer Wilhelmina, Model of a Ferry Steamer, Truss model of a paddle steamer, very detailed and shot inside. Long flat-bottomed vessel, widened in its sides to the width of the gear boxes. Two levels: lower deck and upper deck with ...
- 2020-01-15
- 1
Editorial Half Model of a Screw Steamer, Polychrome, fully planked mold model (starboard) of a three-mast propeller steamship. Eighteen artillery ports on the main deck. The figurehead is a gilt torso of a harnessed man, bareheaded. Elliptical fence of one floor...
- 2020-01-15
- 1
Editorial Negative - Sale Steamboat Company's SS Omeo Passing the Swing Bridge, Sale District, Victoria, circa 1910, The passenger steamer 'Omeo' passing the Swing Bridge on the Latrobe River at Longford, near Sale, which has opened to allow the vessel to pass t...
- 2020-01-15
- 1
Editorial Half Model of a Screw Steamer, Polychromed stacking model (starboard) of a three-mast propeller steamship. The model has a deck and a small campaign deck above the screw duct. Sharp stem with curl on the skeg. Elliptical fence with gilded Rijkswapen, s...
- 2020-01-15
- 1
Editorial Negative - Mildura District, Victoria, circa 1910, A crowd of people on a Murray River paddle steamer.
- 2020-01-15
- 1
Editorial Negative - People Waiting to Board a Paddle Steamer at the Pier, Victoria, circa 1925, A crowd of people waiting to board a paddle steamer at a pier.
- 2020-01-15
- 1
Editorial Negative - Paddle Steamer Underway at Sea, Port Phillip Bay (?), Victoria, circa 1925, A paddle steamer underway at sea.
- 2020-01-15
- 2
Editorial Negative - Launceston, Tasmania, 1922, A steamer on the Tamar River.
- 2020-01-15
- 1
Editorial Negative - Port Melbourne, Victoria, circa 1934, The band which played on the 'Hygeia' paddle steamer. The'Hygeia' left Port Melbourne for moonlight trips around Port Phillip Bay.
- 2020-01-15
- 1
Editorial Steamer at sea.
- 2020-01-15
- 1
Editorial Half Model of a Paddle Steamer, Polychrome stacked model (starboard) of a two-masted paddle steamer. The model has a pinch bow with a curl. Elliptical fence with rudder with round rudder (American rudder) and rounded leaf. One closed gearbox in the sid...
- 2020-01-15
- 1
Editorial Half Model of a Pilot Vessel, Polychromed half model (starboard, stacked model in six layers) of a two-mast propeller steamer. It has a clip-on bow and an elliptical fence under which the screw window is painted on the floorboard. V-shaped underwater s...
- 2020-01-15
- 1
Editorial Half Model of a Paddle Steamer, Polychrome, fully planked mold model (starboard) of a three-masted paddle steamship. At the fore and aft decks, fall gates for artillery on rotating sleigh. Elliptical fence, checkerboard with national coat of arms, rudd...
- 2020-01-15
- 1
Editorial Model of the Construction of the Screw Aperture for a Twin Screw Steamer, Model of part of the stern of a wooden ship ( starboard side), on a groundboard. The model shows the keel, the trusses with sentenced and a part of the weighing and the propeller...
- 2020-01-15
- 1
Editorial Half Model of a Screw Steamer, Stack Model ( starboard) of a three-mast propeller steamship. Closed deck with behind a small upper campan, Midships are indicated with cages. Klippersteven, elliptical gate, screw window and rudder with rounded rudder bl...
- 2020-01-15
- 1
Editorial Half Model of a Paddle Steamer, Polychromed mold model (starboard), the skin completely closed, of a three-masted paddle steamship. The galleon is finished with a gilt curl as a figurehead, a crane beam with a lion's mask. Elliptical fence of a floor w...
- 2020-01-15
- 1
Editorial Recent Foraminifera. A descriptive catalogue of specimens dredged by the U.S. Fish commission steamer Albatross : Flint, James Milton, 1838-1919.
- 2020-01-15
- 1
Editorial Half Model of a Screw Steamer, Stern with bow bent. Scheg S-shaped. Galleon indicated, two sloes and closed entrenchment. Kluigat as an extension of comb wood. Gooseneck with curl and bowsprit. Round aft. Flat wulf and sloping. Stern bent and inclined ...
- 2020-01-15
- 1
Editorial Half Model of a Paddle Steamer, Polychrome stacked model (port) of a two-masted paddle steamer. The model has a falling prow with a double bend in it. Elliptical fence with rudder with round rudder (American rudder) and rounded leaf. One closed gearbox...
- 2020-01-15
- 1
Editorial Half Model of a Screw Steamer, Polychromed and fully planked mold model (starboard) of a three-mast screw steamship, with nine large and two small ports. Almost vertical, straight prow with galleon and curl as figurehead, composite crane beam. Elliptic...
- 2020-01-15
- 1
Editorial Model of a Screw Steamer, Polychromed and rigged truss model of a three-mast propeller steamship, now heavily damaged and incomplete., anonymous, Netherlands, c. 1850 - c. 1870, wood (plant material), brass (alloy), rope, textile materials, h 12 cm ? l...
- 2020-01-15
- 1
Editorial Half Model of the Stern of a Screw Steamer, Model of a half stern of a screw steamship. Model of half a aft ship (port) with screw sleeve, on a floorboard. Elliptical fence, three decks indicated. Soetermeer's cross bond, the skin has been omitted. The...
- 2020-01-15
- 1
Editorial Half Model of an Armored Paddle Steamer, Polychrome stacked model (starboard) of an armored paddle steamer. It is a narrow vessel with two very pointed ends, each with a painted opening for a rudder. The middle section has a deck surrounded by armor pl...
- 2020-01-15
- 1
Editorial Half Model of a Screw Steamer, Polychromed and fully planked mold model (starboard) of a three-mast propeller steamship. Nine gates on the upper deck. Straight, almost vertical stern with solid Juda ear on which a crossbar, the figurehead is a curl. El...
- 2020-01-15
- 1
Editorial Half Model of a Paddle Steamer, Polychromed, fully planked mold model (starboard) of a two-masted paddle steamer. The model has only one artillery gate, but at the fore and aft deck also fall gates for artillery guns. The figurehead is a gilt curl. Ell...
- 2019-12-19
- 1
Editorial Half Model of a Screw Steamer, Polychromed, fully planked mold model (starboard) of a three-mast propeller steamship. The figurehead is a gilt curl. Elliptical fence with gilded Rijkswapen, rudder with round rudder king (American rudder) and rounded ru...
- 2019-12-19
- 1
Editorial Half Model of a Paddle Steamer, Polychromed stacking model (starboard) of a two-masted paddle steamer. The model has a pinch bow. Elliptical fence with rudder with round rudder (American rudder) and rounded leaf. One closed gearbox in the side, two chi...
- 2019-12-19
- 1
Editorial Half Model of a Screw Steamer, Polychromed stack model (starboard) of a three-mast propeller steamship. Almost vertical, straight prow with galleon and curl as figurehead. Elliptical gate, Mangin screw and rudder with rounded rudder blade. The model ha...
- 2019-12-18
- 1
Editorial Half Model of a Paddle Steamer, Mold Model (starboard) of a three-masted paddle steamer, planked above the timber. Elliptical gate without details, rudder with round rudder (American rudder). The closed gearbox has an exceptional shape, front higher th...
- 2019-12-18
- 1
Editorial Half Model of a Screw Steamer, Polychromed block or stack model (starboard) of a three-mast screw steamship, incomplete. The model is worked out in great detail with all deck superstructures, deck equipment (capstans, anchor traps etc.), railings, putt...
- 2019-12-18
- 1
Editorial Moored steamboat on Loch Lomond Loch Lomond - The Steamer at Luss Pier. (title on object), steamship, motorship, lake, Loch Lomond, George Washington Wilson (mentioned on object), c. 1850 - c. 1880, cardboard, photographic paper, albumen print, h 85 mm...
- 2019-12-18
- 1
Editorial Half Model of a Screw Steamer, Polychromed block model (starboard) of a three-mast propeller steamship. The galleon is finished, the figurehead is missing, crane beam with gilt rosette. Elliptical fence, Mangin screw and rudder with stirrer. Extendable...
- 2019-12-18
- 1
Editorial Half Model of a Screw Steamer, Polychromed, fully planked mold model (starboard) of a three-mast propeller steamship. Seventeen gun ports on the main deck. The figurehead is a gilt curl. Elliptical one-storey fence with windows and gilt government coat...
- 2019-12-18
- 1
Editorial Half Model of a Screw Steamer, Polychromed block model (starboard) of a three-mast propeller steamship. Closed upper deck, behind a campaign deck, in front of a baking deck and in the middle a wide deck construction. Klippersteven with condor as the fi...
- 2019-12-18
- 1
Editorial Half Model of a Screw Steamer, Polychrome stacked model (starboard) of a three-mast propeller steamship. The gun deck is indicated by seventeen gates, the upper deck is closed. Sharp stem with curl on the skeg. Elliptical fence where the Rijkswapen is ...
- 2019-12-18
- 1
Editorial Half Model of a Paddle Steamer, Stacking Model (starboard, ten layers) of a three-masted paddle steamer. Clippersteven, elliptical fence, stir with round stirring king. Graceful gearbox, two chimneys on deck. Sheer ascending to both ends. Round truss w...
- 2019-12-18
- 1
Editorial Half Model of a Paddle Steamer, Polychrome stacked model (starboard) of a two-masted paddle steamer. The model has a pinch bow. Elliptical fence with rudder with round rudder (American rudder) and rounded leaf. One closed gearbox in the side, a chimney...
- 2019-12-18
- 1
Editorial Model of a Paddle Steamer, Model of cardboard, representing a steamboat with two ship's wheels. The model is equipped with a steam pipe, two masts, of which a flag is attached to the mast. Midships on both sides hang a sloop on the davits. A canvas is ...
- 2019-12-18
- 1
Editorial Half Model of a Paddle Steamer, Stacking Model (starboard) of a two-mast paddle steamer. Vertical prow, decorated with foliage. Elliptical fence with leaf motifs and national coat of arms, stir with round stirring king. Graceful gearbox, two chimneys o...
- 2019-12-18
- 1
Editorial Half Model of a Paddle Steamer, Polychrome stacked model (starboard) of a single-masted paddle steamer. Straight vertical bow. Elliptical fence with rudder with round rudder (American rudder) and rounded leaf. One closed gearbox supported by beams in t...
- 2019-12-18
- 1
Editorial Half Model of a Screw Steamer, Polychromed and fully planked mold model (starboard) of a three-mast screw steamship with eleven gun ports. The figurehead is a gilt curl. Elliptical fence with Rijkswapen, side gallery, rudder with round stirring king an...
- 2019-12-18
- 1
Editorial Half Model of a Paddle Steamer, Polychrome, fully planked mold model (starboard) of a two-masted paddle steamer. The model shows two gun ports. The figurehead is a gilt curl. Elliptical fence, rudder with round rudder king (Soetermeer's version), rudde...
- 2019-12-18
- 1
Editorial Half Model of a Screw Steamer, Polychromed block model (starboard) of a three-mast propeller steamship. Gun ports or decks are not indicated on the model. Elliptical fence, rudder with round rudder king (American rudder) and rounded rudder blade, the m...
- 2019-12-18
- 1
Editorial Models of a Twin Screw Steamer, Polychromed block model of a wooden twin-screw steamship, damaged. The typical feature of this model is the round stern with two sterns for the two-blade screws and the two rudders, for this two extra keels run from abou...
- 2019-12-18
- 1
Editorial Half Model of a Screw Steamer, Polychromed, fully planked mold model (starboard) of a three-mast propeller steamship. Six gun ports on the upper deck. The figurehead is a gilt curl. Elliptical fence with Rijkswapen, rudder with round rudder king (Ameri...
- 2019-12-18
- 1
Editorial Model of the screw-propeller steamship Watergeus, Model of a Screw Steamer, Polychromed and rigged model of a screw steamship. The model has a deck, a little raised for the mast, and two gun ports in the sides. Sharp prowl without any decoration. Ellip...
- 2019-12-18
- 1
Editorial Model of a Gun Position on the Afterdeck, Model of the aft deck of a paddle steamer with a 60-pound bomb gun on a rotating carriage. The barrel is 15 cm long and has a caliber of 4 mm, a grape screw goes through the grape. The lower carriage consists o...
- 2019-12-18
- 1
Editorial Half Model of a Screw Steamer, Polychromed, fully planked mold model (starboard) of a three-mast screw steamship. Eight artillery ports on the upper deck. The figurehead is a gilt curl. Elliptical fence with Rijkswapen, rudder with round rudder king (A...
- 2019-12-18
- 1
Editorial Half Model of a Paddle Steamer, Polychromed stacking model (port) of a two-masted paddle steamer. The model has a falling prow with a double bend in it. Elliptical fence with rudder with round rudder (American rudder) and rounded leaf. One closed gearb...
- 2019-12-18
- 1
Editorial Model of the Floor and Throat of a Twin Screw Steamer, Two detailed models of the construction of the plane near the stern (starboard side) for a wooden twin-screw steamship with a stern for each propeller and two rudders. The actual keel bends backwar...
- 2019-12-18
- 1
Editorial Half Model of a Screw Steamer, Stacking Model (starboard) of a three-mast propeller steamship. Closed deck and small campaign deck. Klippersteven with curl as figurehead. Elliptical gate with chicory, screw frame for screw light unit and rudder with ro...
- 2019-12-18
- 1
Editorial Model of the Screw Aperture of a Twin Screw Steamer, Model of part of the stern of a wooden twin-screw steamship (starboard side), on a groundboard. The model shows the keel, the trusses with a number of skin passages and a part of the weighing, a meta...
- 2019-12-18
- 1
Editorial Half Model of a Screw Steamer, Polychromed, fully planked mold model (starboard) of a three-mast propeller steamship. The model has eleven gun ports. The figurehead is a gilt curl. Elliptical fence with empty decorative frame, rudder with round rudder ...
- 2019-12-18
- 1
Editorial Half Model of a Screw Steamer, Polychromed stacking model (starboard) of a three-mast propeller steamship. The deck is closed. The model has six large ports, and two small midship, Striking are the bow gates at the front and at the rear, which make max...
- 2019-12-18
- 1
Editorial Half Model of a Screw Steamer, Polychrome and fully planked mold model (starboard) of a three-mast propeller steamship. The figurehead is a gilt curl. Elliptical fence with State Coat of Arms, above which an unknown weapon, rudder with round rudder kin...
- 2019-12-18
- 1
Editorial Half Model of a Screw Steamer, Polychromed, fully planked mold model (starboard) of a three-mast propeller steamship. Eleven gun ports on a deck. Fairly vertical prow, the figurehead is a gilt curl. Elliptical one-storey fence with windows and gilt gov...
- 2019-12-18
- 1
Editorial Umbria steamship in the port of Liverpool, The Ocean Steamship Landing stage, Liverpool, England, - Steamer Umbria departing for New York. (title on object), steamship, motorship, harbor, H.C. White (mentioned on object), New York (city), 1902, cardboa...
- 2019-12-18
- 1
Editorial Two Models of the Floor and Throat of a Twin Screw Steamer, Two detailed models of the construction of the plane near the stern (starboard side) for a wooden twin screw steamship with a stern for each propeller and two rudders. The actual keel bends ba...
- 2019-12-18
- 1
Editorial The Atlantic Telegraph.
- 2019-12-18
- 1
Editorial Half Model of a Paddle Steamer, Polychromed, fully planked mold model (starboard) of a three-masted paddle steamer. The model shows four gun ports. The figurehead is a gilt curl. Elliptical fence, rudder with round rudder king (Soetermeers version), ru...
- 2019-11-19
- 1
Editorial Half Model of a Screw Steamer, Polychromed block model (starboard) of a two-mast screw steamship. Three raised decks: upper campnaje, middle section and baking deck. Vertical, falling stem, with a galleon with a falcon. Elliptical fence with leaf motif...
- 2019-11-19
- 1
Editorial Half Model of a Paddle Steamer, Polychromed and fully planked mold model (starboard) of a three-masted paddle steamer. On the skeg a figurehead representing the three heads of the hellhound Cerberus. At the fore and aft decks, fall gates for artillery ...
- 2019-11-19
- 1
Editorial Steamship at Hastings, Hastings. Excursion Steamer (title on object), steamship, motorship, Hastings, anonymous, c. 1890 - 1910, cardboard, paper, printing ink, collotype, h 85 mm ? w 170 mm.
- 2019-11-19
- 1
Editorial Model of the Floor and Throat of a Twin Screw Steamer, Two detailed models of the construction of the plane near the stern (starboard side) for a wooden twin-screw steamship with a stern for each propeller and two rudders. The actual keel bends backwar...
- 2019-11-19
- 1
Editorial Half Model of a Paddle Steamer, Stacking Model (starboard) of a four-masted paddle steamer. Clip-on bow with gold-plated curl. Elliptical fence with leaf motifs and national coat of arms, rudder with round rudder king (American rudder). Behind the whee...
- 2019-11-19
- 1
Editorial Steamer Tuscawilla at Orange Creek, Unknown maker, American, about 1875, Albumen silver print.
- 2019-11-19
- 1
Editorial Steamer near Arrowhead, BC, 1908.
- 2019-11-19
- 1
Editorial Steamer Natchez. The Mississippi River. New Orleans, Louisiana., Unknown maker, American, about 1875, Albumen silver print.
- 2019-11-19
- 1
Editorial Launch of the "Corona", The Niagara Navigation Company's new steamer. Faded copy photograph of an original print of the launch of the 'Corona.', 1896.
- 2019-11-19
- 1
Editorial Steamer Landing, Wolfeboro, N.H. Steamer Lady of the Lake and Mt. Washington, Unknown maker, American, about 1870, Albumen silver print.
- 2019-11-19
- 1
Editorial Steamer Helena after the heavy rise April 5th. Elevator and depot in distance., Stanley J. Morrow (American, 1843 - 1921), April 5, 1881, Albumen silver print.
- 2019-11-19
- 1
Editorial Steamer Planter. Charleston, S.C., Unknown maker, American, about 1862, Albumen silver print.
- 2019-11-19
- 1
Editorial Interior Steamer Providence, Underwood & Underwood (American, 1881 - 1940s), about 1899, Albumen silver print.
- 2019-11-19
- 1
Editorial Steamer on the Ohio River., Unknown maker, American, about 1862, Albumen silver print.
- 2019-11-19
- 1
Editorial Steamer Northwest in Low Water in Canadian Ship Canal. Photo 3, 1906.
- 2019-11-19
- 1
Editorial Steamer France., Unknown maker, American, about 1862, Albumen silver print.
- 2019-11-19
- 2
Editorial Upper Saloon of the Steamer Providence, looking aft. New York City, Edward and Henry T. Anthony & Co. (American, 1862 - 1902), about 1869?1875, Albumen silver print.
- 2019-11-19
- 1
Editorial Saloon of the Steamer Drew, Looking Forward., Edward and Henry T. Anthony & Co. (American, 1862 - 1902), 1864?1868, Albumen silver print.
- 2019-11-19
- 1
Editorial Steamer Running to Harlem and Mott Haven from Peck Slip, N. York., Edward Anthony (American, 1818 - 1888), about 1859?1862, Albumen silver print.
- 2019-11-19
- 1
Editorial Steamer Minnehaha. Lake George, N.Y., Sigismund Beer (American, born Austria, 1886 -), about 1865?1870, Albumen silver print.
- 2019-11-19
- 1
Editorial View of the East River, showing the steamer City of Boston under way., Edward and Henry T. Anthony & Co. (American, 1862 - 1902), about 1869?1880, Albumen silver print.
- 2019-11-19
- 1
Editorial Steamer Bay Queen., American Stereoscopic Company, about 1866?1868, Albumen silver print.
- 2019-11-19
- 1
Editorial Steamer Hulse Hudson River, Deloss Barnum (American, 1825 - 1873), about 1870, Albumen silver print.
- 2019-11-19
- 1
Editorial Steamer Hulse Hudson River, Deloss Barnum (American, 1825 - 1873), about 1870, Albumen silver print.
- 2019-11-19
- 1
Editorial Views in Jacksonville, Florida. New Steamer Darlington., Edward and Henry T. Anthony & Co. (American, 1862 - 1902), about 1869, Albumen silver print.
- 2019-11-19
- 1
Editorial St. Louis Steamer & Bridge, Unknown maker, American, about 1870, Albumen silver print.
- 2019-11-19
- 1
Editorial Saloon of the Steamer Drew, looking Aft., Edward and Henry T. Anthony & Co. (American, 1862 - 1902), about 1869?1875, Albumen silver print.
- 2019-11-19
- 1
Editorial Steamer York at Lewiston Landing, Niagara River, Deloss Barnum (American, 1825 - 1873), about 1860?1865, Albumen silver print.
- 2019-11-19
- 1
Editorial The Steamer Lady of the Lake Lake Winnipeseogee, N.H., Unknown maker, American, about 1870, Albumen silver print.
- 2019-11-19
- 1
Editorial Steamer near Arrowhead, BC, 1908.
- 2019-11-19
- 1
Editorial Steamer Bristol, Fall River and N.Y. Line., Unknown maker, American, about 1869, Albumen silver print.
- 2019-11-19
- 1
Editorial General view of the lower landing, round house and steamer Peninah back of the round house., Stanley J. Morrow (American, 1843 - 1921), April 1881, Albumen silver print.
- 2019-11-19
- 1
Editorial Wreck of the steamer Western., Stanley J. Morrow (American, 1843 - 1921), about 1880, Albumen silver print.
- 2019-11-19
- 1
Editorial Steamer Northwest in Low Water in Canadian Ship Canal. Photo 3, 1906.
- 2019-11-19
- 1
Editorial New Royal Mail Steamer Quebec, Lying at Company's Wharf, Montreal., William Notman (Canadian, born Scotland, 1826 - 1891), about 1876, Albumen silver print.
- 2019-11-19
- 1
Editorial Steamer New York, Lewiston, Deloss Barnum (American, 1825 - 1873), about 1860?1865, Albumen silver print.
- 2019-11-19
- 1
Loading