filter
-
Brand
- By Category
- Direction
- Date Range
108Events
Pictures
Events
Editorial Rear-loading rifle with drawer and detachable skeleton flask, The rear mechanism of the lock is mounted in an iron case and attached to an elongated iron plate that forms an extension of the lock case. The pan is in a rectangular box that is screwed to...
- 2020-01-15
- 1
Editorial Four-barreled flint running gun, Flint pocket gun with four barrels. A tulip is engraved on the tail plate's tail, the lock plate is signed. The four round runs must be turned by hand, brazed to the core and screwed to the back of a round iron plate. T...
- 2020-01-15
- 1
Editorial Candlestick with balustrade stem and round, bowl-shaped base. The round candlesticks have a curved base with a recessed top, in which a square nut is countersunk. The trunk is screwed in here. The trunk is made up of a baluster between diabolo and prin...
- 2020-01-15
- 1
Editorial Umbrella with gray silk cover in a maple case, with gilt copper fittings and a silk cord with similar rosette, Umbrella with gray silk cover in a sleeve made of bamboo, with gilt copper fittings and a silk cord with ditto rosette. Model: The parasol de...
- 2020-01-15
- 1
Editorial Arm with candle holder from candle crown of two heights, Candle arm belonging to a candle crown of two heights with naked woman on top. The arm has a convex and concave nodus in the middle and thickened slightly on both sides. At the trunk she ends in ...
- 2020-01-15
- 1
Editorial Cup with sunflowers, vines and circles, Vaulted foot. The trunk has a smooth and a facet-cut baluster, a knot and seven discs. Conical faceted cut with facet cut, rounded bottom. The trunk consists of two parts screwed together. At the bottom of the ch...
- 2020-01-15
- 1
Editorial Spiral-shaped candlestick, A spiral-shaped candlestick made of wrought iron on three flat legs with a hole at the end. Above that four c-shaped, flat bars, on which the open-worked, spiral-shaped stem is riveted by means of a straight pin. This pin is ...
- 2020-01-15
- 1
Editorial Monstrans, The object consists of parts that are beaten, driven, cast or sawn. The base and trunk are removable, the upper part is soldered. At the foot, the raised and flat edges as well as the profiled seal are brazed towards the trunk. There is a ro...
- 2020-01-15
- 1
Editorial Candle crown of three heights with six arms each, with Maria chapel in the middle, The object consists of a large number of parts. The trunk is occupied by six bars fitted with spouts and buttresses, forming a chapel with the twelve-sided base on a six...
- 2020-01-15
- 1
Editorial Pair of wheellock pistols Wheellock pistol, Sober styled wheellock gun, part of a couple. The outer wheel is provided with a hook on the underside and stamped with an o, the pan lid can be opened by means of a push pin. The round barrel is stamped on t...
- 2020-01-15
- 1
Editorial Spice mill, The object consists of the cupboard with a slide of yellow copper, the grinder with clamp of iron, the funnel of yellow copper, the crank of iron with ivory handle and copper knob. The cupboard is screwed on the short sides on two narrow pi...
- 2020-01-15
- 1
Editorial Flint pocket gun with battery lock, Flint pocket gun with battery lock and a round, detachable barrel made of bare steel, with a raised narrow band on the rear part, which serves as a support for the key with which the barrel becomes screwed. The room ...
- 2020-01-15
- 1
Editorial Model of an 18-cm Gun on a Pivot and Slide, Very detailed model of an 18-cm cannon on a rotating carriage on a ship's part. The iron barrel is of the Armstrong front loader jacket type, with three grooves, alignment means are provided on the rear. Case...
- 2020-01-15
- 1
Editorial Arm with candleholder of two-height candle crown, Candle-arm belonging to a two-height candle crown with naked woman on top. The arm has a convex and concave nodus in the middle and thickened slightly on both sides. At the trunk she ends in a spiral cu...
- 2020-01-15
- 1
Editorial Gilded silver seal stamp with the monogram S.M. screwed, Later addition to walking stick, snakes, rodents: rat, Bapst et Falize, Paris, c. 1880 - c. 1890, silver (metal), gilding (material), gilding, h 4.3 cm ? d 2.7 cm.
- 2020-01-15
- 1
Editorial Model of a Capstan, Model of a capstan on a wooden floor board, incomplete. The capstan stands on a bronze foot ring with a cable hole on one side. The capstan has a Brown-Hartfield cable holder edge, the holes for five wind trees are made directly abo...
- 2020-01-15
- 1
Editorial Can with representations of the planets, Can with gilt silver. The neck is formed from a woman's breast image and the spout from a palmetal increase in her hairstyle. The egg-shaped barrel is surrounded by a profile along the neck and under the shoulde...
- 2020-01-15
- 1
Editorial Russian bassoon, Russian bassoon in five parts. The thickest two wooden parts are marked 'G. Hanken / Rotterdam '. Thirteen holes, of which the 1st, 2nd, 3rd, 7th, 8th, 12th and 13th have closed valves. The thumb of the left hand serves the 1st, 6th an...
- 2020-01-15
- 1
Editorial Correction Circle, Round wooden plate, covered on both sides with soft iron screwed in with brass bolts. A brass hub in the middle., optician, United Kingdom, 1820 - 1825, wood (plant material), iron (metal), brass (alloy), d 41.5 cm boss: l 7.7 cm.
- 2020-01-15
- 1
Editorial Oil and vinegar set with three bottle holders, Oil and vinegar set of tin on four legs. Consisting of three ajour worked bottle holders, two on the bottom and one in the middle above. There is an open space between the two lower bottle holders. There i...
- 2020-01-15
- 1
Editorial Arm with candleholder of two-height candle crown, Candle-arm belonging to a two-height candle crown with naked woman on top. The arm has a convex and concave nodus in the middle and thickened slightly on both sides. At the trunk she ends in a spiral cu...
- 2020-01-15
- 1
Editorial Holder of oil and vinegar set with four bottles in a pointed oval holder. The pointed oval holder has straight, slightly raised walls on the sides. It rests on four downwardly bent, bent, ribbed legs. Fillet edges run above these legs and along the top...
- 2020-01-15
- 1
Editorial Copper plate of grenadier cap, A yellow copper plate is screwed onto a wooden board in the shape of a grenadier cap. The plate, partially cut away, bears the crowned weapon held by two crowned lions, below it a lion's head surrounded by cannons, flags,...
- 2020-01-15
- 1
Editorial Arm of a sabbath lamp, Arm of a sabbath lamp. The S-shaped arm ends in a curl towards the trunk and merges outwards into a flat mounting part, in which the convex and concave ring is screwed onto the profiled round fat trap. This is the third arm, numb...
- 2020-01-15
- 1
Editorial Fuse and Spanner, Copper tube with a thick top with screw thread on the outside and in which a short iron bolt is screwed, the thin lower end is smooth and has a fire jet channel. An iron wrench is attached to the tube for the bolt on top., Gobius. G.F...
- 2020-01-15
- 1
Editorial Sword, Wallonia, épée wallonne derivative. The iron hilt consists of a hilt knob with a prominent sting knob on it and the fist brace screwed onto it, which merges into both the guard rod with a curl at the end and into the parallel brackets that are...
- 2020-01-15
- 1
Editorial Wig powder shaker made of multicolored painted Meissen porcelain, Wig powder shaker made of painted porcelain. The spreader has an egg-shaped body and a long, slender neck that is screwed onto the body. The glans-shaped end has five holes. The body and...
- 2020-01-15
- 1
Editorial Four Fuse Extractors, Two pairs of tube pullers to remove wooden timers from round shells. The one pair is made of iron and works according to the same principle: they consist of a pair of pliers that grips around the end of the tube and is then pulled...
- 2020-01-15
- 1
Editorial Binoculars of the signal post of the optical telegraph on the Weesperpoort in Amsterdam, Binoculars of wood with copper sections at the ends. The extendable eye part consists of five pieces and three lenses. Off is screwed to the copper end of the wood...
- 2020-01-15
- 1
Editorial Candle crown of two heights with six arms each, The object consists of an iron rod with an iron hook and the following cast parts: the Maria figure, the right hand riveted to her arm, her left hand correspondingly riveted with the Christ child, the cro...
- 2020-01-15
- 1
Editorial Degen with silver hilt, Sierdegen. The hilt of cast silver is folded obliquely, the fist brace is screwed to the hilt knob and stamped on the wearing side with an Amsterdam city hallmark, a monogram of a silversmith and a brand that probably represents...
- 2020-01-15
- 1
Editorial Gauge for Priming Tubes, Mold for testing the penetration of impact pipes. It consists of a bell-shaped solid copper body, through which an iron tube goes from top to bottom, a pin is provided in this tube, on which the whipping pipe is placed. An equa...
- 2020-01-15
- 1
Editorial Signaling Horn with Bellows, Simple bellows with horn screwed to the mouth., J. Stone & Co. (mentioned on object), Deptford, 1850 - 1885, wood (plant material), brass (alloy), iron (metal), leather, h 10 cm ? w 80 cm ? d 27 cm.
- 2020-01-15
- 1
Editorial Air pressure rifle, The mechanism of the lock is mounted outwards against an iron plate which in turn is attached to a gold-plated brass lock case, the left side of which also serves as a (removable) screw plate, engraved with rococo style work, a Loui...
- 2019-12-19
- 1
Editorial Sword with scabbard, ?p?e wallonne with authentic scabbard. The iron hilt consists of a hilt knob with a prominent sting knob on it and the fist brace screwed to it, which merges into both the guard rod with a curl at the end and a small, four-leafed f...
- 2019-12-19
- 1
Editorial Arm with candleholder of two-height candle crown, Candle-arm belonging to a two-height candle crown with naked woman on top. The arm has a convex and concave nodus in the middle and thickened slightly on both sides. At the trunk she ends in a spiral cu...
- 2019-12-19
- 3
Editorial Bullet with which C.J. baron Krayenhoff was struck in the abdomen, Round bullet of which one half is painted black with white inscription on it. In a round wooden box consisting of two halves that can be screwed onto each other., C.J. baron Krayenhoff,...
- 2019-12-18
- 1
Editorial Deck Light, Round patent glass with separate grid that can replace the glass. The brass flange is screwed onto the deck with six screws, the glass is inserted from the bottom with the mat convex side facing up, and is locked in the flange with a bayone...
- 2019-12-18
- 2
Editorial Bourbon fuse Percussion Fuse, Percussion tube for round shells, consisting of three parts: the outer body with screw-thread for screwing into the grenade and with brass protective cap, the inner tube with chimney for the percussion cap, a locking ring ...
- 2019-12-18
- 1
Editorial Arm of a sabbath lamp, Arm of a sabbath lamp. The S-shaped arm ends in a curl towards the trunk and merges outwards into a flat mounting part, in which the convex and concave ring is screwed onto the profiled round fat trap. This is the fourth arm, num...
- 2019-12-18
- 1
Editorial Bag carrier The object consists of two molded parts that can be screwed together: the figure and the base. The man, dressed in shorts and jerkin, standing on a round pedestal, carries on his head a stuffed pocket in which round signs are engraved as we...
- 2019-12-18
- 1
Editorial Walking stick handle, Walking stick in the shape of a tree trunk with snake and rat, Walking stick in gold and silver colored copper. It has the shape of a tree trunk on which sits a rat surrounded by a snake. In later time, a gold-plated silver seal s...
- 2019-12-18
- 1
Editorial Monstrans, The object consists of the following parts: six edge pieces under the foot, the foot, the decorative element around the root of the trunk, the trunk with the nodus (where two pins are riveted below and above), the transition from trunk to cu...
- 2019-12-18
- 1
Editorial Cup, with sunflowers, berries and circles, hollow baluster-shaped stem with bud and seven discs. Fruits and sunflowers ground between the bands on the chalice. Foot with garlands. The trunk consists of two parts that are screwed together., anonymous, B...
- 2019-12-18
- 1
Editorial 5 cm Shell, 5 cm grenade with percussion tube. The grenade has a cylindrical pointed body, with zinc cams for four migratory fields. A percussion tube with a brass protective cap is screwed into the tip, with a little leather., Constructie Werkplaats, ...
- 2019-12-18
- 1
Editorial Two-armed candlestick with a figure of a country man, The candlestick consists of four parts: the base, the male figure, two fat traps, two candle holders. The base and the fat traps are turned, the male figure and the candle holders are cast. The low ...
- 2019-12-18
- 1
Editorial Arm of a sabbath lamp, Arm of a sabbath lamp. The S-shaped arm ends in a curl towards the trunk and merges outwards into a flat mounting part, in which the convex and concave ring is screwed to the foot-rejuvenating holder on the profiled round fat tra...
- 2019-12-18
- 1
Editorial Emergency mortar or iron bombarde, The bombarde consists of two parts: a front part or boiler of wrought iron and a back part or breech of supposedly cast iron. The construction of the boiler consists of a spiral-wound iron rod of square cross-section....
- 2019-12-18
- 1
Editorial Angel on base, The object consists of three cast and embossed parts: the base, the angel and the pin with which it is attached. The profiled base has a base and two curling elements on either side. The downward-looking angel, who has a drapery over his...
- 2019-12-18
- 2
Editorial Two-armed candlestick with St. Christophorus and the Christ Child, The candlestick is composed of the following parts: the base, the trunk with St. Christophorus, the two fat traps and the two candle holders. The low round base, decorated with grooved ...
- 2019-12-18
- 1
Editorial Oil and vinegar set with four bottles in a pointed oval holder. The pointed oval holder has straight, slightly raised walls on the sides. It rests on four downwardly bent, bent, ribbed legs. Fillet edges run above these legs and along the top of the ho...
- 2019-12-18
- 1
Editorial Arm with candleholder of two-height candle crown, Candle-arm belonging to a two-height candle crown with naked woman on top. The arm has a convex and concave nodus in the middle and thickened slightly on both sides. At the trunk she ends in a spiral cu...
- 2019-12-18
- 1
Editorial Stamp stamp with screwed-together handle and stamp surface, Stamp stamp composed of a handle and stamp surface that can be screwed together. The handle is hollow and has a thread on the bottom. The stamp stamp probably belonged to Claes Andrieszoon Gou...
- 2019-12-18
- 1
Editorial Oil and vinegar set with two bottles and a canister in pointed oval holder, The pointed oval holder of the oil and vinegar set has a curved side slightly raised wall. It rests on four downwardly bent, bent, ribbed legs. Fillet edges run above these leg...
- 2019-12-18
- 1
Editorial Candlestick, two-armed, the legs supported with lions (title on object), The candlestick consists of a foot with a trunk placed on three legs. This is cast in one piece. The two-armed turner is placed on top of which two candle holders are screwed in t...
- 2019-12-18
- 1
Editorial Candlestick with balustrade stem and round, bowl-shaped foot. The round candlesticks have a curved foot with a recessed top, in which a square nut is countersunk. The trunk is screwed in here. The trunk is made up of a baluster between diabolo and prin...
- 2019-12-18
- 1
Editorial Soup tureen on plate, Soup tureen on plate. The oval saucer with raised center piece rests on four spherical legs that are tapered at the bottom and whose lower part is ribbed. The also oval foot of the terrine is screwed on with four pins. The oval bo...
- 2019-12-18
- 1
Editorial Flint pocket pistol, Flint pocket pistol with drawn screw-on barrel, part of a torque. The lock mechanism is hidden in a partially iron, partially gilt copper-plated housing that extends into the handle, the rooster is engraved with a blossom branch, t...
- 2019-12-18
- 1
Editorial Explosive Projectile for Whale Killing, Exploding bullet, incomplete. It has a cylindrical housing made of brass, with a movable chimney screwed into the more or less pointed top. A smashing cap must be placed on the chimney, which hits a crossbar insi...
- 2019-12-18
- 1
Editorial Decorative element of a sabbath lamp, Decorative arm of a sabbath lamp. The S-shaped arm ends in a curl towards the trunk. On the outside it merges into a wider part, into which the cup-shaped flower is screwed. This is the first arm, numbered with 1 r...
- 2019-12-18
- 1
Editorial Coffee filter jug, rectangular with slightly convex front and back and curved base. On a narrow side a lion's mask with a bow-shaped handle with a wooden handle in the mouth. The faceted faucet has a barrel-shaped section with a rotatable end piece, de...
- 2019-12-18
- 1
Editorial Furket, The fork is wide, both teeth are bent horizontally at the ends, thicken there and are furthermore split into two blades which can be screwed together by a basket that ends with a double wing. The very light wooden stick is stained black (?) And...
- 2019-12-18
- 1
Editorial Pair of wheellock pistols, Wheellock pistol, Sober designed wheel lock gun, part of a couple. The outer wheel is provided with a hook on the underside and stamped with an o, the pan lid can be opened by means of a push pin. The round barrel is stamped ...
- 2019-12-18
- 1
Editorial Decorative element of a sabbath lamp, Decorative arm of a sabbath lamp. The S-shaped arm ends in a curl towards the trunk. On the outside it merges into a wider part, in which the wide openwork flower with a large, round profiled core is screwed. This ...
- 2019-12-18
- 1
Editorial Three-height candle crown stem with six arms each, with Mary's chapel in the center. The stem is occupied by six bars fitted with spouts and buttresses, forming a chapel with the twelve-sided pedestal on. a six-sided console, ending in a lion's head wi...
- 2019-12-18
- 1
Editorial Serpent, Serpent of wood covered with black lacquered leather. A plate is screwed onto the middle tube frame, engraved with 'Invention by L. Embach & C. in Amsterdam. Thirteen valves: the 3rd and 5th closed at the front, the 4th, 6th, 7th, 9th, 11th an...
- 2019-12-18
- 1
Editorial Coffee urn with stand and roaster Tap jug with brazier, round, conical, with two curved ears, The round, conical can rejuvenates upwards and is slightly arched at the bottom. The jug has a loose, bell-shaped lid that consists of a concave and a convex ...
- 2019-12-18
- 1
Editorial Candlestick with figure of a lion, The four-legged object consists of a lion sitting on its hind legs, which has its tail wrapped around the handle, on which the fat trap and the candle holder are screwed. It makes the impression of being a counterfeit...
- 2019-12-18
- 1
Editorial Set of six matching cups, a salt barrel and a spice barrel, Nest of six crucibles, cylindrical with bent lip edge. A flat lid closes the smallest cup, which consists of two halves screwed onto each other, the upper one is divided into quarters for salt...
- 2019-12-18
- 1
Editorial Honorary of Musquetier with inscription: because of the Doggersbank Action, with scabbard, Doggerbank honorary saber given by Stadholder Prince Willem V in 1781 to officer Musquetier. This type of a more or less normalized honorary saber stands out bec...
- 2019-12-18
- 1
Editorial 18 cm Shell, Pointed 18 cm grenade. The grenade is 51 cm long and has a caliber of 176 mm. It has two rings of screwed-in cams for a drawn barrel with three pulling fields and a tube hole. At the top there are three shallow holes for the ammunition tap...
- 2019-12-18
- 1
Editorial Arm with candleholder of two-height candle crown, Candle arm belonging to a two-height candle crown with naked woman at the top. The arm has a convex and concave nodus in the middle and thickened slightly on both sides. At the trunk she ends in a spira...
- 2019-12-18
- 2
Editorial Wall arm of gilt copper, decorated with C- and S-volute acanthus leaves, Wall arm of gilt copper. The applique consists of three merging C-shaped acanthus drinks. Two S- and C-shaped volutes stand out to the left and right, onto which the candle holder...
- 2019-12-18
- 2
Editorial Amsterdam obtains its weapon and the right to place the imperial crown above it, Doos, consisting of two silver plaques that can be screwed together. Front: Count Willem sitting on the throne, surrounded by courtiers and warriors, gives the weapon to a...
- 2019-12-18
- 1
Editorial Decorative element of a sabbath lamp, Decorative arm of a sabbath lamp. The S-shaped arm ends in a curl towards the trunk. On the outside it merges into a wider part, into which the cup-shaped flower is screwed. This is the fourth arm, unnumbered., unk...
- 2019-12-18
- 1
Editorial President's hammer of E.N. van Kleffens used during the 9th meeting of the General Assembly of the United Nations, President's hammer with round head. Top and bottom have a small bulge. A slightly flared stem with a round knob is mounted in the head. A...
- 2019-12-18
- 1
Editorial Two-armed candlestick made of brass, The profiled conical foot has a raised edge, which means it can also serve as a fat trap. The round trunk is riveted on the foot, adorned with two knots, and the upper part is threaded. The base of the trunk is mark...
- 2019-12-18
- 1
Editorial Arm with candleholder of two-height candle crown, Candle-arm belonging to a two-height candle crown with naked woman on top. The arm has a convex and concave nodus in the middle and thickened slightly on both sides. At the trunk she ends in a spiral cu...
- 2019-12-18
- 1
Editorial Candlestick with Saint Sebastian, The candlestick is composed of the following parts: the foot with the three legs, the decoration on these legs, Saint Sebastian, the tree, the fat trap and the candleholder. The decorations, which are riveted to the le...
- 2019-11-19
- 1
Editorial Candelabrum in lobe style with three candle holders, The candlestick now consists of the following parts: the base and the stem riveted therein, the two-armed turner and the associated fat traps. The screw to secure the shifter on the smooth part of th...
- 2019-11-19
- 1
Editorial Indicator, McNaughts steam engine indicator consists of a tubular body to which a rotating sleeve is attached to an arm. A string that has been rolled around the tube at the bottom can be attached with an end to a moving machine part, so that the tube ...
- 2019-11-19
- 1
Editorial Ewer and basin with the arms of Vlissingen, Bowl with engraved border with birds, fruit and flower vines. In the center the arms of Vlissingen and Zeeland, The round bowl has a broad, slightly hollow edge, closed by a narrow outer edge in which a repea...
- 2019-11-19
- 1
Editorial Oil and vinegar set with three bottle holders, Oil and vinegar set of tin on four legs. Consisting of three ajour worked bottle holders, two on the bottom and in the middle above. There is an open space between the two lower bottle holders. There is a ...
- 2019-11-19
- 1
Editorial Arm of a sabbath lamp, Arm of a sabbath lamp. The S-shaped arm ends in a curl towards the trunk and merges outwards into a flat mounting part, in which the convex and concave ring is screwed to the foot-rejuvenating holder on the profiled round fat tra...
- 2019-11-19
- 1
Editorial Deck Light, Round patent glass with separate grid. The brass flange is screwed onto the deck with six screws, the glass is inserted at the bottom with the mat convex side down, and is locked into the flange with a bayonet catch with three cams, there a...
- 2019-11-19
- 1
Editorial Necessaire of gilded copper in relief decorated with rocailles, in which a pair of scissors, screw-in travel cutlery, screw, awl, curved needle, folding ruler, slate, toothpick / ear scoop, needle case and tweezers / file. Model: Flat, tapered, with li...
- 2019-11-19
- 1
Editorial Arm with candleholder of two height crowns belonging to a candle crown of two heights with naked woman on top. The arm has a convex and concave nodus in the middle and thickened slightly on both sides. At the trunk she ends in a spiral curl. From the o...
- 2019-11-19
- 2
Editorial Two-armed candlestick with a male and female figure, The candlestick is composed of the following eight parts, of which only the first two are removable: the base, the trunk, the two figures, the two fat traps and the two candle holders. The trunk scre...
- 2019-11-19
- 1
Editorial Oil and vinegar strapping canister consisting of two bottles and a canister in a pointed oval container, Glass pepper shaker with a multi-curved, silver fillet cap articulated by two fillet and profile edges of dots, and is crowned by a pine cone-shape...
- 2019-11-19
- 1
Editorial Arm with candleholder of two-height candle crown, Candle-arm belonging to a two-height candle crown with naked woman on top. The arm has a convex and concave nodus in the middle and thickened slightly on both sides. At the trunk she ends in a spiral cu...
- 2019-11-19
- 1
Editorial Candlestick with two arms, The profiled conical foot has a raised edge at the top, allowing it to also serve as a fat trap. The round trunk is riveted on the foot and is decorated with three buttons. The upper part of the stem, which is partially threa...
- 2019-11-19
- 1
Editorial Flint gun, Sober styled flint gun, probably of Dutch origin. The lock has sharply beveled edges, the rooster has been worked around. The loop is unadorned and unnoticed. The stock is grooved at the front, the butt knob is separated from the handle by a...
- 2019-11-19
- 1
Editorial Marie Wens being burned with her mouth closed with a screw, her son comes to get this screw to keep the memory, Anno 1573, Parallel title: Maritge Wens is burnt to Antorf with his mouth screwed shut, after which her son is looking for the screw looking...
- 2019-11-18
- 1
Editorial Iean Bret, English, burnt, mouth closed with a screw, Antwerp, Anno 1576, Parallel title: Hans Bret Engel?nder screwed up his tongue to Antorf, and burned it, A nn o 1576, copper engraving, 98.), p. 205, Luyken, Jan (inv. et fec.), Jan Luyken: Th??tre ...
- 2019-11-18
- 1
Editorial CANISTER.
- 2019-02-22
- 1
Editorial Close-Helmet for the Field.
- 2019-02-11
- 1
Editorial Reinforcing Plates of Armor for the Tilt.
- 2019-02-11
- 1
Editorial Acoustic-Electric Guitar.
- 2019-02-11
- 1
Editorial Suit of armour (barding) for a horse, first half of the 16th century. Armoured barding with coat of arms from Dresden museum A, tail part B, and steel champron with screwed-in shield from the great hall at Erbach C,D. Chromolithograph from Hefner-Alten...
- 2018-10-11
- 1
Editorial Pair of Stirrups.
- 2018-08-08
- 1
Loading