filter
-
Brand
- By Category
- Direction
- Date Range
81Events
Pictures
Events
Editorial Model of a 20-Gun Cutter, Polychromed, witnessed block model of a 20-piece cutter. It has eighteen pieces (two missing) on the open deck. The prow is bent. Flat mirror, hollow wulf polychrome painted with draperies, closed fence polychrome painted with...
- 2020-01-15
- 1
Editorial Half Model of a Pilot Vessel, Half Model (stack model, starboard) of a two-mast flat bottom. Round bow and stern, strong stern, wide rudder with tiller. The sheer runs to both ends, a bar wood, a sword. The rig is detailed with booms for both masts, bo...
- 2020-01-15
- 1
Editorial Model of a Pilot Vessel, Tested block model of a one-master. Round bow and stern, falling stern, straight rudder with decorated rudder head and wooden tiller going over a kind of slider on the buoy. The sheer runs slightly to both ends, a bar wood. Pea...
- 2020-01-15
- 1
Editorial Model of an Armed Longboat, Truss model with round timber. Smooth-edged double-belted barkas, round truss with flat sheer and flat mirror, a forecourt, four diets and rails and an open cabin with side dents. The prow is provided with a disk. Three-part...
- 2020-01-15
- 1
Editorial Model of a Shocker, Tested and polychromed truss model of a shocker. The model has the typical thick, straight, falling prow with disc in the end, the grounding is pointed. Pointed stern with straight stern, stern rudder with curled rudder head and woo...
- 2020-01-15
- 1
Editorial Half Model of a Koff, Polychromed mold model (port) of a three-master. The large number of truss jigs is striking. The skin above the bar wood is closed. Round stern, straight helm with tiller over the deck. The sheer goes up to both ends, one barwood....
- 2020-01-15
- 1
Editorial Model of a War Galley, Testified truss model of a flat-bottomed gun galley with sails and twenty-eight oars, on standard. The ship has one deck plus an elevated rear deck with an undercarriage for guns. The galleon is very low and there is a heavy cann...
- 2020-01-15
- 1
Editorial Half Model of a Fishing Boat, Polychromed mold model (port) of a single-mast flat bottom. Round stern, no fence, wide helm with tiller over deck. Sheer ascending to both ends, one barwood. Flat bottom. Scale approx. 1:24 (derived)., anonymous, Netherla...
- 2020-01-15
- 1
Editorial Model of a Longboat, Polychromed truss model on a standard. Smooth-edged double-belted bark, curved with almost flat sheer and flat mirror, disc in the prow, a forecourt, five dulls and four rails, and an open cabin with side depths and extra loose dof...
- 2020-01-15
- 2
Editorial Half Model of a Pilot Vessel, Polychromed mold model (starboard) of a one-master. The skin above the bar wood is closed. Round stern, wide rudder with decorated rudder head and tiller on deck. The sheer runs to both ends, a bar wood. Peaked trusses. Th...
- 2020-01-15
- 1
Editorial Model of a Gunboat, Construction model of the hull of a flat-bottomed smooth gunboat on a floorboard, the skin under the bar wood has been left out for the most part. Round fore ship with two gun ports, around aft ship. Four gun ports in sides. The shi...
- 2020-01-15
- 1
Editorial Half Model of a Gunboat, Polychromed mold model (starboard) of a flat bottom. Pointed stern, wide rudder with tiller over deck. The sheer is almost flat, one barwood. This fork gunboat had one piece in front, Amsterdam, Admiralty of Amsterdam, anonymou...
- 2020-01-15
- 1
Editorial Model of a Coastal Defense Vessel, Block model of the trunk with round wood, incomplete. The smooth-bore vessel has twelve gun ports on the open upper deck, a straight stern and a round stern with vertical stern. Straight rudder with rudder quadrant an...
- 2020-01-15
- 1
Editorial Model of a Pilot Vessel, Testified hollowed block model of a two-mast flat bottom. Parts of the deck can be taken to show the firing below deck. Round bow and stern, strong stern, wide rudder with suckers, decorated rudder head and wooden tiller. The s...
- 2020-01-15
- 1
Editorial Model of a Gaff-Rigged Gunboat, Testified eroded block model of a single-mast flat-bottomed gunboat, incomplete. Round bow and stern, a port in the bow, two in the stern, four in the sides. The deck is detailed with a roasting spindle, a chimney for th...
- 2020-01-15
- 1
Editorial Model of a Longboat, Polychromed truss model on a standard. Smooth-edged double-belted bark, curved with almost flat sheer and flat mirror, disc in the prow, a forecourt, nine dulls and eight rails, and an open cabin with side dips and extra loose deaf...
- 2020-01-15
- 1
Editorial Model of a Jolly Boat, Truss model on a standard. Over-seamed ankle sloop, spiked round truss with almost flat sheer and flat mirror, a forecourt, four rowing mounds and rails and an open cabin with side mats, a board and extra dull. The prow is copied...
- 2020-01-15
- 1
Editorial Half Model or a 3-Gun Gunboat, Polychromed mold model (starboard) of a single mast flat bottom. One artillery gate in the bow. Round stern, wide rudder with tiller over deck, Stirrer head decorated with floral pattern. The sheer runs forwards and backw...
- 2020-01-15
- 1
Editorial Model of a Launch, Tested truss model on a standard. Smooth-edged double-belt sloop, rounded with flat mirror, a forecourt, five diets and rail, and an open cabin with side dents. Three-part frames. Simple rudder with a wooden tiller. The rig consists ...
- 2020-01-15
- 1
Editorial Model of an Armed Longboat, Tested truss model on a standard. Smooth-edged double-belted barkas, round truss with almost flat sheer and flat mirror, a forecourt, nine diets and eight rails and an open cabin with side dents. Midships a roasting spindle ...
- 2020-01-15
- 1
Editorial Half Model of a Working Craft, Mold Model (starboard) of a flat-bottomed master. The skin above the bar wood is closed. The deck is closed with a long rectangular deckhouse in the middle. Round stern, wide rudder with tiller on deck. The sheer runs to ...
- 2020-01-15
- 1
Editorial Model of a Lifeboat, Tested truss model of a double-belt lifeboat of ten belts, the guns are missing. It is a smooth-edged pointed-hole sloop, with curved stern and straight, slightly falling stern. The skin is painted white. It has a double skin, with...
- 2020-01-15
- 1
Editorial Half Model of a Koff, Polychromed mold model (starboard) of a two-mast. Round stern, straight rudder with decorated rudder head and tiller over the deck. The sheer goes up to both ends, one barwood. Round truss with flat bottom. The foremast leans back...
- 2020-01-15
- 1
Editorial Model of an Officers' Launch, Tested truss model on a standard. Double seamed sloop, rounded with flat mirror, a forecourt, five diets and rail, and an open cabin with side dents. Three-part frames. Simple rudder with a curled brass tiller. The rig con...
- 2020-01-15
- 1
Editorial Model of a Longboat, Polychromed truss model on a standard. Smooth-edged double-belted bark, curved with almost flat sheer and flat mirror, disc in the prow, a forecourt, seven dulls and six rails, and an open cabin with side depths and extra loose dof...
- 2019-12-19
- 1
Editorial Model of a galley, Model of a Galley, Polychromed, witnessed truss model of a galley. A cannon in the foreship. The ship has a louse patch, a covered foredeck with raised lower sled, then a flank with seventeen dulls on either side, in the middle two n...
- 2019-12-19
- 1
Editorial Half Model of a Gaff-Rigged Gunboat, Mold Model (starboard) of a single-master. The skin above the bar wood is closed, one gun gate in the bow, one on the aft deck. The front deck is closed and has a sloping portion for the guns. Round stern, wide rudd...
- 2019-12-19
- 1
Editorial Half Model of a Landing Craft, Polychromed mold model (starboard) of a pointed hole sloop, wide rudder with tiller. The sheer runs up to both ends. Double articulated frame., anonymous, Netherlands, 1780 - 1820, wood (plant material), h 15.5 cm ? w 62....
- 2019-12-19
- 1
Editorial Half Model of a Launch, Polychromed mold model (port) of a sloop. Flat mirror with fence board, wide rudder with tiller. The sheer runs to both ends, one barwood, hollow stacked keel. Peaked trusses., anonymous, Netherlands, 1780 - 1820, wood (plant ma...
- 2019-12-18
- 1
Editorial Parts of a Model of a Rowing Mechanism, Parts of a very incomplete model of a rowing or winding implement, consisting of two pairs of identical parts. The first pair are oars or rudders, with a hole in the stand at half height, and a kind of tiller tha...
- 2019-12-18
- 1
Editorial Half Model of a Yacht, Polychromed mold model (starboard) of a single mast flat-bottomed yacht. The skin above the bar wood is closed. The aft deck is slightly raised. Round stern, wide rudder with decorated rudder head and tiller over deck. The sheer ...
- 2019-12-18
- 1
Editorial Half Model of an Admiralty Yacht, Extensively decorated, detailed and polychromed block model (starboard) of a flat-bottomed single-mast yacht. The model has a deck with a cabin at the rear, the floor of which floats to let the tiller sail underneath, ...
- 2019-12-18
- 1
Editorial Model of a coffe, Model of a Koff, Witnessed and polychromed block model of a two-mast coffe. The model has one main deck with shutters, and behind a sunken cabin with a campaign deck on top. Flat bow with curved bow, round stern with two ports. Long s...
- 2019-12-18
- 1
Editorial Model of a Gaff-Rigged Gunboat, Truss model with spars of a single-mast flat-bottomed gunboat, cover parts can be removed to show the firing inside. Round bow and stern, a port in the bow, two in the stern and two in the rear, a cannon on a turn slide ...
- 2019-12-18
- 1
Editorial Half Model of an Inspection Craft, Polychromed block model of a single-mast flat bottom. The deck is closed and detailed with a deck structure, a servant, a slightly raised campaign deck and a landing. Fittings for a sword are fitted against the buoy, ...
- 2019-12-18
- 1
Editorial Half Model of a Boyer, Round fore ship. Prowly sphere above the end vertically. Grounding is complete. Forepart is quite high and sloping towards the sides. Round stern with falling stern (2/5 cm). A straight rudder over board with tiller and very wide...
- 2019-12-18
- 1
Editorial Model of an 18-Gun Cutter, witnessed and polychromed model of an over-built cutter. Thirteen of the eighteen pieces have been preserved. The ship has a slightly curved prow and sharp bow foundation, small flat mirror, large hollow wulf painted with dra...
- 2019-12-18
- 1
Editorial Half Model of a Pilot Vessel, Polychromed mold model (starboard) of a single mast flat bottom. One artillery gate in the bow. Round stern, wide rudder with tiller over deck. The sheer runs forwards and backwards, one mountain wood., Assistance (ship), ...
- 2019-12-18
- 1
Editorial Model of a Pilot Cutter, Very detailed block model with round wood from a pilot cutter, on brass standard. The vessel has one flat deck. It has a straight, sharp cutter stern, and an overhanging fence decorated with leafwork, a shell and the inscriptio...
- 2019-12-18
- 1
Editorial Half Model of a Gunboat, Polychromed mold model (starboard) of a one-master. The skin above the barwood is closed, one gun gate in the bow. The deck is closed and detailed with the beting, a chimney, the landing and two hatches. Round stern, wide helm ...
- 2019-12-18
- 1
Editorial Half Model or a 3-Gun Schooner Gunboat, Polychromed mold model (starboard) of a two-mast. The skin above the barwood is closed, the model has a railing. The skeg is low, next to the bowsprit and the mast is room for a cannon in the bow (one on each sid...
- 2019-12-18
- 1
Editorial Model of a Stallion, Testified hollowed-out block model of a single-masted flat bottom, incomplete. The model has a deck and a cabin, the roof of which can be removed. The cabin is fully fired on the inside and has a roof and a pyramid-shaped deck ligh...
- 2019-12-18
- 1
Editorial Model of a Gig, Tested truss model on a standard. Low ankle boom boom, rounded with flat mirror, a forecourt, four diets and rails, open cabin with side dents and a hemp hole. Simple rudder with a curled brass tiller. The model has one mast with bucket...
- 2019-12-18
- 2
Editorial Model of an Oared Landing Craft, Polychromed mold model on supports, with sentenced instead of dense skin. It is a pointed hole flat bottom with straight stern, the sheer rising forward, simple rudder whose tiller is missing. The model has a large, fro...
- 2019-12-18
- 1
Editorial Model of a Boyer, Testified truss model of a single-mast flat-bottomed boat, a boatman. The model has a deck and a cabin from which parts can be removed. The cabin is fully fired on the inside and has a top deck, the cockpit has benches in the sides, s...
- 2019-12-18
- 2
Editorial Model of an Armed Longboat, Truss model with round wood on a stand. Smooth-edged double-belted barkas, round truss with flat sheer and flat mirror, a forecourt, seven dulls and rails and an open cabin with side vents. The prow is coppered and has a dis...
- 2019-12-18
- 1
Editorial Model mallejan or triquebal marked on ash body, Model mallejan or triquebal. Marked on TRIQUEBAL ash body. The point of the tiller is missing. A mallejan or triqueball is a single-axle tug for moving artillery (19th century)., l 61 cm ? w 31 cm ? h 24 cm.
- 2019-12-18
- 1
Editorial Model of a gaff-rigged gunboat, Tested truss model of a single-mast flat-bottomed gunboat, the model can be dismantled in two layers. Round bow and stern, a port and trap gates in the bow, two in the stern and two in the rear, a cannon on a turn slide ...
- 2019-12-18
- 1
Editorial Model of a Gunboat, Plank frame model of the hull of a single-mast flat-bottomed gunboat, partly painted black and white. It has a piece in the front in a port under the bowsprit, and two small pieces in the sides behind. The front deck under the gun i...
- 2019-12-18
- 1
Editorial Model of a Captain's Launch, Tested truss model on a standard. Double seamed sloop, rounded with flat mirror, a forecourt, seven diets and rail, and an open cabin with side dents. Three-part frames. Simple rudder with a curled brass tiller. The rig con...
- 2019-12-18
- 1
Editorial Half Model of an Admiralty Yacht, Fully decorated and polychromed block model (port) of a single-mast flat-bottomed yacht. One deck with cabin behind. Four round gates in the fore ship. Climbing lion as figurehead, dolphin on the bow. Flat mirror with ...
- 2019-12-18
- 1
Editorial Model of a 12-Gun Brig, Testified block model. Twelve pieces and fourteen gates, two continuous decks and a superstructure with access below deck. The figurehead is a Roman soldier with shield, lance and sword, the ditch knees are decorated with painte...
- 2019-12-18
- 1
Editorial Half Model of a Coastal Vessel, Polychromed mold model (starboard) of a single-mast flat bottom. The skin above the barwood is closed and carries a sword, a putting iron and three rowing sticks. Closed deck with a rectangular deckhouse in the middle. R...
- 2019-12-18
- 1
Editorial Half Model of a Poon, Polychromed mold model (starboard) of a one-master. Round stern, wide rudder with decorated rudder head and tiller over deck. The sheer runs up to both ends, continuous wood on the stern and stern. Round bilge., anonymous, Rotterd...
- 2019-12-18
- 1
Editorial Model of a Launch, Truss model with round timber on a standard. Over-seamed ankle sloop, spiked round truss with almost flat sheer and flat mirror, a forecourt, five dulls and rails and an open cabin with side depths and a board. The prow is copied. Ea...
- 2019-12-18
- 2
Editorial Model of an Armed Longboat, Truss model with round wood on a stand. Smooth-edged double-belted barkas, round truss with flat sheer and flat mirror, a forecourt, five diets and rails and an open cabin with side dents. The prow is coppered and has a disk...
- 2019-12-18
- 1
Editorial Model of a Jolly Boat, Tested truss model on a standard. Overcast ankle belts gig, curved with flat mirror, a forecourt, five diets and rail, and an open cabin with side dents. Simple rudder with wooden tiller. The model has a bucket sail as main sail,...
- 2019-12-18
- 1
Editorial Model of a Prototype Dispatch Vessel, Model of a catamaran propelled by hand. The two floaters are connected to each other with slats at the ends and each have a place for a driver. The pre-movement mechanism consists of a single scoop wheel with count...
- 2019-12-18
- 1
Editorial Model of a Jolly Boat, Truss model with round wood on a stand. Over-seamed ankle sloop, spiked round truss with almost flat sheer and flat mirror, a forecourt, five dulls and rails and an open cabin with side depths and a board. The prow is copied. Eas...
- 2019-12-18
- 1
Editorial Half Model of a Pilot Vessel, Polychromed mold model (port) of a two-mast flat bottom. The skin above the bar wood is closed. Round stern, wide rudder with decorated rudder head and tiller on deck. The sheer runs to both ends, one barwood. The surface ...
- 2019-12-18
- 1
Editorial Sample of an Iron Tiller Rope, Sample of a galvanized iron wire handlebar strip, cable stroke with six spike strands of eighteen yarns each, around a rope heart., anonymous, Netherlands (possibly), 1866, iron (metal), rope, l 202 cm.
- 2019-12-18
- 1
Editorial Half Model of a Landing Craft, Polychromed mold model (starboard) of a three-mast boat. Closed deck with a rectangular deckhouse in the middle. Round fore ship with one cannon. Round stern, wide rudder with tiller. The sheer runs up to both ends, one b...
- 2019-12-18
- 1
Editorial Model of a Lifeboat, Tested and polychromed model on a standard. Overcast ankle belts gig, spiked round truss with kim keels, the sheer going backwards slightly, flat mirror painted with a golden heart, seven dulls and an open cabin. Simple rudder with...
- 2019-12-18
- 1
Editorial Half Model of a Schooner, Mold Model (starboard) of a two-mast. The skin above the barwood is closed and the ship has a railing. Arched bow rising to vertical. Twisted mirror, hollow wulf rising to the small campaign deck, closed gate, sternly falling ...
- 2019-12-18
- 1
Editorial Village view in Till and the Tiller House, 1746, Paulus van Liender, 1759.
- 2019-12-17
- 1
Editorial Model of a Lifeboat, Tested truss model of a single-belt lifeboat of six oars, the guns and the dredge are missing. It is an overnight pointed sloop, with curved stern and straight, slightly falling stern. The skin is painted white. It has a double ski...
- 2019-11-19
- 1
Editorial Model of a Longboat, Rigged and polychromed truss model on a standard. Smooth-edged double-belted barkas, round truss with almost flat sheer and flat mirror, a forecourt, six diets and five rails and an open cabin with side dents. The prow is provided ...
- 2019-11-19
- 2
Editorial Model of a Gentleman's Yacht, a rigged truss model without sails, on groundboard. It is a single mast yacht with boring stern, twisted mirror, flat wulf and flat fence. The model has a deck, cockpit, cabin and front. The wide rudder with curved tiller ...
- 2019-11-19
- 1
Editorial Model of a Jolly Boat, Truss model on a standard. Over-seamed ankle sloop, spiked round truss with almost flat sheer and flat mirror, a forecourt, four rowing mounds and rails and an open cabin with side mats, a board and extra dull. The prow is copied...
- 2019-11-19
- 1
Editorial Model of a Longboat, Polychromed truss model on a standard. Smooth-edged double-belted bark, curved with almost flat sheer and flat mirror, disc in the prow, a forecourt, eight dulls and seven rails, and an open cabin with side depths and extra loose d...
- 2019-11-19
- 1
Editorial Half Model of a Launch, Polychromed mold model (port) of a sloop. The buoy above the bar wood is closed. Flat mirror with fence board, wide rudder with tiller. The sheer runs up to both ends, One barwood. Peaked trusses., anonymous, Netherlands, c. 178...
- 2019-11-19
- 1
Editorial Model of a Three-Masted Ship, Truss model of an exceptional three-masted ship with rudimentary rigging. The skin is only applied to port. The most striking are the hull shape and construction. The hull is an angular S-frame with a built-in keel, which ...
- 2019-11-19
- 1
Editorial Model of an Armed Longboat, Truss model with round wood on a stand. Smooth-edged double-belted barkas, round truss with flat sheer and flat mirror, a forecourt, six diets and rails and an open cabin with side dents. The prow is coppered and has a disk....
- 2019-11-19
- 1
Editorial Model of a Launch, Polychromed truss model on a standard. Smooth-edged double-belted barkas, round truss with almost flat sheer and flat mirror, a forecourt, six dulls and five rails, an extra loose deaf in the bow, and an open cabin with side dips and...
- 2019-11-19
- 1
Editorial Model of the Stern of a Ship with the Screw Placed behind the Rudder, Beautifully decorated block model of a stern with a twisted mirror. The screw window has been replaced by a brass frame for the rudder. The rounded rudder blade is divided into an up...
- 2019-11-19
- 1
Editorial Half Model of a Poon, Polychromed mold model (starboard) of a one-master. The skin above the bar wood is closed. Round stern, wide rudder with decorated rudder head and tiller over the deck. The sheer runs up to both ends, one barwood. Round bilge., an...
- 2019-11-19
- 1
Editorial CROSSBOW.
- 2019-02-15
- 1
Editorial CROSSBOW.
- 2018-08-08
- 1
Editorial Target Crossbow with Windlass.
- 2018-08-06
- 1
Editorial Village view in Till and the Tiller House, 1746, Paulus van Liender, 1759.
- 2018-07-30
- 1
Editorial The Tiller-girls, around 1923 Canvas, 110 x 88,6 cm.
- 2018-07-02
- 1
Loading